Prescriptions EN

the perimeter bearing walls, load-bearing internal walls and slip. Masonry is brick mortar MVC.Perimeter walls: Material: HELUZ 38Dimensions: 247x380x238mmBrick consumption: 16 pcs/m2Mortar consumption: 3,8 l/m2Pieces on pallet: 60 pcs / palletMaterial requirements 1.NP 101m2 * 16 = 1616ks (with reserve 28 pallets)Internal walls: Material: HELUZ 30 Dimensions: 247x300x238mmBrick consumption: 16 pcs/m2Mortar consumption: 4.6 l/m2Pieces on pallet: 96 pcs / palletMaterial requirements 1.NP 30.6 m2 * 16 = 490 (with reserve 6 pallets)Partition: Material: HELUZ 14Dimensions: 497x140x238mmBrick consumption: 8 pcs/m2Mortar consumption: 13 l/m2Pieces on pallet: 100 pcs / palletMaterial requirements 1.NP 60 * 8 = 480 pc (with reserve 5 pallets)Malta MVC: a total of 372 bags (5.6palet)3. TAKEOVER WORKPLACE: The takeover of the site will be March 21, 2011 between the client (investor) and the contractor. The takeover will work on an agreed date 3.4.2011. Department will take over the platoon conducting foundation structure, with the participation of technical supervision (TDI) and the vertical structure of the site contractor. Part of the site will take delivery of project documentation, drawn in storage areas. High rise building orientation and position by an authorized person. Part of the handover and takeover of the site is a regular entry in the construction log.Input control basics are done in accordance with applicable standards. Accuracy of floor and wall foundations: 5 mm from the project shape when measuring two meters battens. Control of the base plate will be performed using the leveling. Test of the construction supervision and in the presence of the site inspection will be done by writing to the building 4. WORKING CONDITIONS:Working hours are determined by 7:00 to 7:00 p.m.. All work will be carried out under favorable climatic conditions. In the course of this work may be muddy, freezing, or other changes in the work area. An integral part in ensuring all production tasks and work is also to ensure maximum care to protect the health of all workers. All workers must be trained in OSH. Safe detailed regulations for different types of work are contained in various regulations, national standards or internal rules, which must be fully respected, and it is the responsibility of the construction management with them enough time to meet. The access road to the site is directly from the adjacent road. Gas connection with the termination of the HUP in pillar at the border of the parcel, LV connection with the termination of the electrometer box in pillar at the border of the parcel. Basic hygiene will be provided mobile toilets and washroom TOI TOI. The whole site will be fenced off system with panels up to 1.8 m in order to prevent unauthorized persons. Masonry mortar POROTHERM TM must be carried out at temperatures higher than 5 ° C.5. STAFF:The implementation works on vertical structures will oversee the site manager. He will oversee the technological processes and the amount of material consumption and safety in the workplace. Working machines that will be used for that work must be operated only by personnel who have the proper training. All work will be carried out on site.List of workers:Master builder3 masons2 append1 worker to operate the mixer. 6. MACHINES AND TOOLS:Standard equipment for the masonry work: containers, spoons, shovels, trowels, hammers, lathes, levels, measuring tapes, plumb, buckets, wheels,, string, float, propane burner, spatula.To measure out lengths of steel band sized, leveling device with a prescribed accuracy, measuring rods, prism poles, bases, calculator, for checking the dimensions according to the project documentation ..Extension cords, lamps, stands for hanging cables and lights. Necessary protective equipment are set out in this range for the driver: the helmet when moving outside the cab machines, clothing, footwear, hearing protection. Necessary protective equipment are set out in this range to other workers: clothing, shoes, ear protection, helmet, gloves. Protective equipment is recommended for all workers as: safety glasses, protective, respiratorMachines: Mixer Atika Comet 130 l7. PROCEDURE:1st height• In dry and clean base plate with melted waterproof belt against ground moisture. The belt must have a minimum overlap of 150 mm so that he could connect without a problem vertical in the belt after the walling wall 1.PP.• The underlying passports to put aside all the corners of the building. They called surveyor assesses the helpers. Only after a thorough assessment, we can begin to build, first in the way that, create an opposite corners.• Facing the authorized person corners bases and site checks and writes the entire construction log. These horns are based on a mortar bed walls. It should all be measured diagonally opposite corners and check out the exact reason and foundation for further action.30924548450500• It will be done first high masonry perimeter walls to 1 height of masonry and up to 1.5 m. And then bearing internal walls. Masonry is considered under regulation technology company whose masonry used. For the best HELUZ bricks overlap one half and lay on 12 mm thick layer of mortar. When it is necessary to observe the difference in height in the walls gradually come to terms. It goes without omitting gaps in windows and doors according to the accompanying drawings. 115316015621000The way of laying the first row of bricksThe detail of the corner2nd heightAfter construction of the first height of masonry will be installed auxiliary scaffolding and masonry will be done the second high outer walls. There will also be placed over the holes lined translations and then the second height bearing internal walls, according to the same processes and conditions.Lintels are placed above the opening after laying 10th brick row in height 2500mm. There are 8 lintels used on the peripheral wall and 6 on the interior walls.After construction of vertical structures supporting brick work will be all non-bearing partitions according to the project documentation. Afrer finishing last brick row on the peripheral walls and interior walls it is needed to assembly a formw